Blog

Jul 03, 2023

New ecofriendly heterogeneous nano

Scientific Reports volume 12, Article number: 15364 (2022) Cite this article 1297 Accesses 2 Citations 2 Altmetric Metrics details A novel ecofriendly heterogeneous catalyst containing Schiff base

Scientific Reports volume 12, Article number: 15364 (2022) Cite this article

1297 Accesses

2 Citations

2 Altmetric

Metrics details

A novel ecofriendly heterogeneous catalyst containing Schiff base coordinated Cu(II) covalently attached to Fe3O4@SiO2 nanoparticles through imidazolium linker [Fe3O4@SiO2-Im(Br)-SB-Cu (II)] was synthesized and characterized by using various techniques. The catalytic efficiency of this nano-catalyst was tested in water in the synthesis of tetrazole derivatives using two one-pot multicomponent reaction (MCR) models: The synthesis of 1-aryl 1H-tetrazole derivatives from the reaction of aniline, triethyl orthoformate, and sodium azide and the synthesis of 5-aryl 1H-tetrazole derivatives from the reaction of benzaldehyde, hydroxy amine hydrochloride, and sodium azide. The investigation showed that (i) The catalyst is highly efficient in the synthesis of tetrazole derivatives with high yield (97%) in aqueous medium and mild temperatures; (ii) The catalytic effectiveness is due to the synergy between the metallic center and the imidazolium ion and (iii) The reuse advantage of the catalyst without contamination or significant loss (12% of loss range) in the catalytic activity.

Tetrazoles are essential class of poly-aza-heterocyclic compounds largely discovered in nature1. Recently, tetrazoles have received much attention due to their large spectrum of applications in the field of medicine and biology such as anticancer, antiviral, antiallergic, antibiotic, anti-HIV, etc.,2,3,4,5. Homogeneous catalysts were predominantly used, due to their solubility and high activity, in the synthesis of tetrazole derivatives than their heterogeneous catalysts counterpart. However, homogeneous catalysts suffer from many drawbacks such as high temperature working conditions, difficult recycling, product contamination, and deactivation through dimerization. To overcome these problems, methods were devised to heterogenized such catalysts by grafting them on organic6 and inorganic supports7,8,9, including polymerization10,11. Considering drawbacks associated with both homogenous and heterogeneous catalyst systems, researcher dedicated considerable efforts to develop efficient synthetic methodologies for the synthesis of tetrazole derivatives using nanostructured catalyst systems. Since 2010, ample nano-catalysts or nanomaterials supported catalysts have been explored to avoid drawbacks associated with the conventional strategies for the synthesize of tetrazole derivatives12,13,14,15,16,17. A review published by Mittal and Awasthi12 summarized the most important Nano-based catalyst strategies used in the synthesis of 5-substituted 1H-tetrazole derivatives. Examples of useful nano-catalyst strategies such as the use of Fe3O4 NPs described by Kolo and Sajadi13, the use of 4′-phenyl-2,2′:6′,2′′-terpyridine–copper(II) complex immobilized onto activated multi- walled carbon nanotubes [AMWCNTs-O-Cu(II)-PhTPY] reported by Sharghi and co-workers14, salen complex of Cu(II) supported on superparamagnetic Fe3O4@SiO2 nanoparticles [Fe3O4@SiO2/Salen complex of Cu(II)] reported by Sardarian and co-workers15, ligand complex, including Schiff base, of copper(II) supported on superparamagnetic Fe3O4@SiO2 nanoparticles used by Javidi and co-workers16 and Cu/aminoclay/reduced graphene oxide nanohybrid (Cu/AC/r-GO nano-hybrid) reported by Soltan Rad and co-workers17 were developed for the preparation of various 5-substituted tetrazole derivatives to have all the possible benefits and advantages in terms of performance, reusability, and ease of use. However, most of the strategies summarized in this review require solvent-free conditions at high temperatures or solvents at high temperatures which can be a limitation for their applications. Magnetic nanoparticles, especially the cost effective and well-studied Fe3O418,19,20, have number of remarkable features like high active surface area, low toxicity, superparamagnetism21, ease of recycling due to their removal from reaction mixtures with an external magnet22,23, high dispersion and reactivity, and chemical/thermal stability. Also, ease of surface modification and ligands coupling due to the chemical nature and accessible reactive groups on the surface of the nanoparticles24. All these characteristics make them very attractive as an ideal support for nano-catalyst systems for the synthesis of tetrazole derivatives.

The idea of green chemistry has become an integral part of sustainability which makes catalysis science even more innovative. From the viewpoint of green chemistry, sustainable catalyst must possess a series of distinct advantages like high activity, selectivity and efficiency, reasonable recovery, high stability, and excellent recyclability. To address these requirements, magnetic nano particles have received tremendous attention in the last decades as an excellent catalyst supporting materials for the synthesis of tetrazole derivatives. Recent advances in this area were summarized in the well documented review by Rahul Shrivastava and co-workers25. For the synthesis of 5-substituted tetrazole via [3 + 2] cycloaddition reaction, two interesting reports by Tamoradi and co-workers, described the use of magnetic Fe3O4@tryptophan–La and Fe3O4@tryptopahn-Nd in water @ 80 °C26,27, Fe3O4-adenine-Zn was used in PEG 400 at 120 °C28 Fe3O4@tryptophan@Ni was reported to work in PEG 400 at 120 °C and a palladium(0) based nano-catalyst, Fe3O4@l-lysine-Pd(0), was described by Ashraf and co-workers to work in water at 100 °C29. For the synthesis of 1-substituted tetrazole derivatives via multicomponent reaction (MCR), Habibi and co-workers have reported the use of Fe3O4@5,10-dihydropyrido[2,3-b]quinoxaline-7,8-diol copper and Fe3O4@1,10-phenanthroline-5,6-diol@Mn complexes in the reaction between amine, ethyl orthoformate and sodium azide under solvent-free conditions30,31 A bifunctional magnetite nano-catalyst (Fe3O4/HT-NH2-CuII) was used by Salimi and Zamanpour group in the reaction between aromatic amines, ethyl orthoformate and sodium azide in water @ 90 °C32, and Salimi and co-workers also reported the use of Fe3O4@HT@AEPH2-CoII in the same MCR between amine, ethyl orthoformate and solidum azide in water at 90 °C33. Due to the broad spectrum of tetrazole derivatives applications, there is still a growing need of innovative green and ecofriendly catalytic systems for the synthesis of tetrazole derivatives. With this idea in mind, we embarked in the development of new Fe3O4 supported nano-catalyst that is suitable to work in aqueous conditions with all the benefits and advantages of a magnetic nano-catalyst. To allow the catalyst to work in water, we based our design on the use of water-soluble linker or coupling spacer arm to bring the catalyst to aqueous medium during the catalytic process. We decided to focus on a well-studied, cost effective and tested Cu(II)-coordinated Schiff base nano-catalyst having an imidazolium linker to nanoparticles. The nano-catalyst efficiency was then successfully investigated in one-pot multicomponent reaction (MCR) synthesis of tetrazole derivatives in aqueous medium. The catalyst achieved high tetrazole derivatives yield in a short reaction time and, due to its magnetic characteristic, it was easily removed from the products without leaving behind any metallic contamination.

All solvents were purchased from Merck Co. and dried by standard procedures. All chemical reagents were purchased from Sigma-Aldrich chemical company and used without further purification. The progress of reactions was monitored by TLC on Silica-gel Polygram SILG/UV254 plates. Fourier Transform Infrared (FT-IR) spectra were recorded on a PerkinElmer 780 FT-IR spectrometer (KBr tablets). The morphology (SEM) and elemental analysis (EDS) of the catalyst were determined by using the FE-SEM TESCAN MIRA3 instrument. Transmission Electron Microscopy (TEM) images were obtained with a Philips EM208 S electron microscope. X‐ray Diffraction (XRD) patterns were collected using a Philips PW 1730 diffractometer using Cu Kα radiation (λ = 1.54 A°). Thermogravimetric Analysis (TGA) was performed on a Q600 TA instrument at 30–700 °C with a heating rate of 20 °C min−1 in an argon atmosphere. Vibrating Sample Magnetometer (VSM) analysis was performed at room temperature using an LBKFB instrument. Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) analysis was performed using a Simultaneous VISTA-PRO instrument. Atomic Absorption Spectroscopy (AAS) analysis was performed using a Shimadzu AA6200 instrument.

The silica coated Fe3O4 magnetic nanoparticles were synthesized by previously reported methods34. FeCl3.6H2O (6.8 g) and FeCl2.4H2O (2.5 g) were added to deionized water (300 mL) and stirred under nitrogen gas at room temperature. Gradually, ammonia solution (25% w/w, 70 mL) was added to the vigorously stirred mixture. As soon as the solution's color turned black, the resulting nanoparticles were separated by an external magnet and washed several times with deionized water.

To synthesize silica-coated nanoparticles, Fe3O4 nanoparticles (3.0 g) were dispersed by sonication in a deionized water/ethanol solvent mixture (1:4 v/v, 500 mL) 30 min. Then a solution of ammonia (25% w/w) was gradually added until the pH reaches 10. The tetraethyl orthosilicate (TEOS, 20 mL) was slowly added to the mixture and stirred three hours at 50 °C. The silica-coated nanoparticles (Fe3O4@SiO2) were collected by a permanent magnet and washed with deionized water and ethanol several times and dried in a vacuum oven at 50 °C for 24 h. In the final stage, Fe3O4@SiO2 (1 g) was sonicated in dry toluene (40 mL) for 30 min. Then, 3-Chloropropyl triethoxysilane (2.0 mL) was added dropwise and refluxed for 20 h. The resulting chloro-modified Fe3O4@SiO2 was removed from the reaction mixture by a strong magnet, washed with in toluene, ethanol and diethyl ether for several times. Then dried under vacuum at 60 °C for 12 h35. The loading amount of Cl atom was 0.3 mmol per gram catalyst based on EDX.

Imidazole (0.5 mmol, 0.034 g) was added to the dispersed solution of chloro-modified Fe3O4@SiO2 (1.0 g) in dry toluene (40 mL) and triethylamine (NEt3, 0.5 mmol, 0.05 g) was added dropwise and refluxed for 24 h. The resulting nanoparticles were separated with the external magnet and washed with distilled water and ethanol. The resulted Fe3O4@ SiO2-Im nanoparticles were dried in a vacuum oven at 80 °C for 12 h.

The synthesized nanoparticles of Fe3O4@SiO2-Im (1.0 g) in dry ethanol (40 mL) were dispersed for 30 min by sonication. The ethanolic solution of 3-Bromopropylamin hydrobromide (0.5 mmol, 0.11 g) was gradually added to the stirred mixture and refluxed for 48 h. The resulting nanoparticles were separated by the magnet, washed with distilled water, ethanol, and diethyl ether. Finally, nanoparticles were dried in a vacuum at 80 °C for 20 h.

The nanoparticles (Fe3O4@ SiO2-Im [Br]-PrNH2. HBr, 1.0 g) from the previous step were dispersed by sonication in dry ethanol (40 mL) followed by dropwise addition of salicylaldehyde (0.5 mmol, 56 µL) and sodium hydroxide (NaOH, 0.5 mmol, 0.02 g) solutions. The reaction mixture was then refluxed in ethanol 20 h. The resulting nanoparticles were separated by the magnet and washed with distilled water, ethanol, and diethyl ether. Finally, nanoparticles were dried in a vacuum at 80 °C for 20 h.

The ethanolic solution of Cu (OAC)2. H2O (0.8 mmol, 0.16 g) was added dropwise to the well dispersed Fe3O4@ SiO2-Im [Br]-Schiff base nanoparticles (1.0 g)in ethanol and refluxed 12 h. The resulting Cu(II)-coordinated nanoparticles were separated by an external magnet and washed several times with ethanol, diethyl ether and dried in a vacuum at 60 °C for 10 h.

aniline (1.0 mmol, 0.09 mL), Triethyl orthoformate (1.2 mmol, 0.2 mL), sodium azide (1.0 mmol, 0.06 g) in a water (1.0 mL) in the presence of Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst (0.6 mol%, 0.008 g) were stirred at 40 °C. The reaction progression was monitored by thin-layer chromatography (TLC) at different interval of time using n-Hexane/Ethyl acetate (4:1) as eluent. At the end, the reaction mixture was cooled, and catalyst removed by an external magnet. The reaction mixture was extracted with 3 × 10 mL of ethyl acetate. The organic phase was dried with anhydrous Na2SO4, filtered and then evaporated. The pure product was obtained by recrystallization in a mixture of n-Hexane/Ethyl acetate. The recovered yield was 97%.

Benzaldehyde (1.0 mmol, 0.1 mL), hydroxylammonium chloride (1.0 mmol, 0.07 g), sodium azide (1.2 mmol, 0.08 g) in water (1.0 mL) in the presence of Fe3O4@ SiO2-Im[Br]-SB-Cu (II) nano-catalyst (0.9 mol%, 0.012 g) were stirred at 40 °C. The reaction was followed by thin-layer chromatography (TLC) at different time intervals in (n-Hexane/Ethyl acetate: 4:1). The reaction mixture was cooled, and the catalyst removed by an external magnet. 5 mL of HCl (5 N) was added to the reaction mixture and extracted with 3 × 10 mL of ethyl acetate. The organic phase was extracted again with the HCl solution (1 N), followed by a saturated solution of NaCl. The organic phase was dried with the anhydrous Na2SO4, filtered and then evaporated. The pure product was obtained in 97% yield by recrystallization with n-Hexane/Ethyl acetate solvent mixture.

Fe3O4@SiO2-Im[Br]-SB-Cu(II) nano-catalyst was synthesized as depicted in Fig. 1 and investigated in the synthesis of tetrazole derivatives (Fig. 2). The prepared catalyst is characterized by various methods. The FT-IR spectra of the catalyst synthesis steps are shown in Fig. 3. The spectrum 1a, which corresponds to the Fe3O4 nanoparticles, show the peaks at 571 and 3442 cm−1 corresponding to stretching vibrations of Fe–O and OH groups, respectively36,37. The appearance of new peaks at 1077 and 1192 cm−1 are corresponding to Si–O (Symm.) and Si–O (Asymm.), respectively. These peaks are a confirmation that the surface of nanoparticles is protected by silica coating layer (Fig. 3, 1b)38. The transmittance of core shelled Fe3O4 nanoparticles was slightly lower than that of Fe3O4 nanoparticles due to silica coating. Absorbed peaks in 2852 (Symm.), 2934 (Asymm.), 1420 (Bending) and 814 cm−1, respectively, correspond to CH2 and C–Cl are evidence of the modification of nanoparticles surface (Fig. 3, 1c)39. The disappearing C–Cl peak and the appearance of new peaks in 1632 and 1742 cm−1 indicate that the imidazole ring was coupled to the nanoparticles surface (Fig. 3, 1d)40. The spectrum 1e shows peak in 3422 cm−1, which correspond to NH of amine group. The new peak at 1636 cm−1 is evidence of the formation of imine (Fig. 3, 1f)41. The new peaks at 635 and 620 cm−1 correspond to Cu–N and Cu–O. Also, the transfer of imine peak to lower frequencies confirms the formation of the metal complex (Fig. 3, 1g).

Synthesis of Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst.

Synthesis of the tetrazole derivatives in the presence Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst.

FT-IR spectra: (a) Fe3O4; (b) Fe3O4@SiO2; (c) Fe3O4@SiO2-(CH2)3Cl; (d) Fe3O4@SiO2-Im; (e) Fe3O4@SiO2-Im[Br]; (f) Fe3O4@SiO2-Im[Br]-SB; (g) Fe3O4@SiO2-Im[Br]-SB-Cu (II).

The elemental composition of Fe3O4@SiO2-Cl (Fig. 4) and the nano-catalyst Fe3O4@SiO2-Im[Br]-SB-Cu (II) (Fig. 5) was determined by Energy Dispersive X-rays (EDX) analysis. Absence of chlorine element in the nano-catalyst confirms the attachment of ionic metal Schiff base complex on the surface of modified nanoparticles leading to the nano-catalyst. Anticipated elemental composition: C (10.40%), N (3.77%), O (40.21%), Si (5.48%), Fe (36.49%), Br (0.57%) and Cu (3.10%).

EDX Spectrum of Fe3O4@SiO2-Cl.

(a) EDX Spectrum and (b) Projected elemental composition of Fe3O4@SiO2-Im[Br]-SB-Cu (II).

The morphology of Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst was determined by Scanning Electron Microscopy (SEM). SEM images show spherical and irregular shapes for the nanoparticles (Fig. 6).

SEM image of Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst.

The morphology of Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst was also determined by Transmission electron microscopy (TEM) (Fig. 7a). Also, according to the histogram diagram of the nano-catalyst, the average particle size was estimated to be about 24 nm (Fig. 7b).

(a) TEM image (scale bar at 50 nm) and (b) histogram of Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst.

The X-ray diffraction (XRD) patterns of Fe3O4, Fe3O4 @ SiO2 and Fe3O4@SiO2-Im [Br] -SB-Cu (II) are shown in Fig. 8. The XRD pattern of Fe3O4 magnetic nanoparticles is in accordance with (PDF # 88-0866, reference JCPDS card no. 19-629), which shows a crystalline cubic spinel structure42. XRD patterns of Fe3O4, Fe3O4 @ SiO2 and Fe3O4 @ SiO2-Im[Br]-SB-Cu (II) show the peaks in 2θ = 30.1, 35.4, 43.1, 53.4, 57, and 62.6° which are related to the phase of (220), (311), (400), (422), (511), and (440), respectively and are in full agreement with the Fe3O4 pattern showing that their crystalline phase and position have not changed. These results indicate that the crystalline cubic structure of nanoparticles Fe3O4 is preserved during the catalyst preparation process. In the Fe3O4@SiO2 spectrum, a broad peak is observed in 2θ = 10–20°, which is related to amorphous silica. This broad peak for the nano-catalyst was shifted to lower angles due to the synergetic effect of amorphous silica and Cu(II)-coordinated Schiff base. The average size of nanoparticles was calculated by the Debye–Scherrer equation (D = K.λ/β.cosθ, λ (wavelength, 0.154 nm), K (a crystallized form factor, 0.94), β (Full width at half maximum, (rad)), θ (Bragg reflection angle, (°)) to be about 28 nm which correspond to the TEM results.

XRD patterns of Fe3O4, Fe3O4@SiO2 and Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst.

The magnetic property of nano-catalyst was measured at different steps of the synthesis by vibrating sample magnetometer (VSM) (Fig. 9). As shown in Fig. 9, the magnetic properties of nanoparticles are gradually reduced by the silica layer coating and by the coupling of the Cu(II)-complex to the surface of the nanoparticles. Although the magnetic saturation values for Fe3O4, Fe3O4@SiO2 and Fe3O4@SiO2-Im[Br]-SB-Cu (II) are 80, 58 and 38 emu g-1, respectively, nano-catalyst has still a strong magnetic property for its removal from the reaction mixture by an external magnet. This was confirmed by the catalyst recycling study (see Fig. 15).

Magnetization curves of Fe3O4, Fe3O4@SiO2 and Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst.

The thermal stability of Fe3O4@SiO2-Im[Br]‐SB‐Cu (II) nano-catalyst was examined by TGA technique (Fig. 10). In the thermogram diagram of this catalyst, the maximum weight loss occurs in the range of 414–500 °C (15%), which is related to removing organic compounds from the surface of the catalyst. The 5% weight loss between 138 and 414 °C, is related to removing some organic compounds and adsorbed water molecules on the surface of iron oxide nanoparticles, respectively.

TGA of Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst.

The amount of supported copper on the Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst was determined by AAS analysis and confirmed with ICP-OES. AAS analysis showed 0.83 mmol/g of Cu (II) on the nano-catalyst surface. This Cu(II) content was confirmed by the ICP-OES test which showed a 0.72 mmol of Cu(II) per gram of nano-catalyst.

The catalytic activity of Fe3O4@SiO2-Im[Br]-SB-Cu (II) was investigated in the synthesis of 1-aryl and 5-aryl 1H-tetrazole derivatives. The synthesis of 1-aryl 1H-tetrazole derivatives was optimized using the reaction model of aniline, triethyl orthoformate, and sodium azide (Fig. 11). The results of this investigation are summarized in Table 1. Firstly, the reaction efficiency in polar protic solvents (Entries 1–3) is higher than in polar aprotic and non-polar solvents (Entries 4–7). This is probably due to the ionic nature of catalyst. The reaction was run in the presence of different level of catalyst and the best result was obtained with 0.6 mol% of catalyst. A control reaction with 0 mol% of catalyst was run and as expected no product was obtained (Entry 9). Other reactions controls were tried in the presence of Fe3O4 and Fe3O4@SiO2-Im[Br] (Entries 14, 15) with very low efficiency. The effect of the temperature and time on the reaction were also investigated (Entries 16–21) and we concluded that the best conditions are: H2O solvent, 0.6 mol% of the catalyst loading, time 20 min and 40 °C. To determine the accuracy of the data generated using the small scale reported in Table 1, the best run (Entry 1) was repeated using 10 mmol scale under the same conditions and the yield of the reaction was reproducible.

The synthesis of 1-aryl 1H-tetrazole derivatives.

After optimizing the reaction conditions, different 1-aryl 1H-tetrazole derivatives were synthesized by using different aniline derivatives under the same conditions (Table 2). The reaction in the presence of electron-donating and electron-withdrawing groups on benzaldehyde and the spatial barrier on aniline have significant impact on the reaction efficacy (Entries 2, 3 & 7, 8).

The plausible mechanism for the synthesis of 1-aryl 1H-tetrazole derivatives by using Fe3O4@SiO2@Im[Br]-SB-Cu (II) nano-catalyst is depicted in Fig. 1244. Triethyl orthoformate is activated by the N3-coordinated Cu(II) Nano-catalyst followed by aromatic amine attacks on the triethyl orthoformate resulting in the formation of an amide acetal intermediate. The nucleophilic attack of the azide anion on the amide acetal followed by cyclization lead to the desired tetrazole.

Plausible mechanism for the synthesis of 1-aryl 1H-tetrazole derivatives.

The reaction model using benzaldehyde, hydroxy amine hydrochloride and sodium azide was selected to optimize the conditions for the synthesis of 5-aryl 1H-tetrazole derivatives (Fig. 13). The results of this investigation are shown in Table 3. Firstly, water was identified as the solvent of choice (Entries 1–8). As in the case of 5-aryl 1H-tetrazole derivatives, we confirmed that the reaction needs the catalyst to proceed and no product was obtained in the absence of the catalyst (Entries 9–13). In this reaction model, the highest conversion rate was obtained in the presence of 0.9 mol% of catalyst (Entry 1). Also in the presence of the precursor of our catalyst (Fe3O4 and Fe3O4@SiO2-Im[Br]), the reaction conversion rate was very low (Entries 14, 15). The effect of temperature and reaction time was also investigated (Entries 16–21) and the best conditions are: H2O as solvent, 0.9 mol% of the catalyst, time 20 min and 40 °C. To determine the accuracy of the data generated using the small scale reactions reported in Table 3, the best run (Entry 1) was repeated using 10 × the scale under the same conditions and the yield of the reaction (96was reproducible.

The synthesis of 5-aryl 1-H tetrazole derivatives.

Different 5-aryl 1H-tetrazole derivatives were synthesized using different aryl-aldehyde derivatives under the optimized conditions (Table 4). The results show that the reaction efficiency is impacted by the electronic properties and the position of the substituents groups on the benzaldehyde ring.

The hypothetical mechanism for the formation of 5-aryl 1H-tetrazole derivatives using Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst is illustrated in Fig. 1450. The carbonyl of the aryl-aldehyde is activated by the Cu(II)-catalyst leading to the oxime formation by the attack of hydroxyl ammonium chloride. The formed Cu(II)-activated oxime reacts through a [3 + 2] cycloaddition with the azide to yield the desired 5-aryl tetrazole after elimination of a water molecule.

The proposed mechanism for the synthesis of 5-aryl 1H- tetrazole derivative.

We studied the reusability of Fe3O4@SiO2-Im[Br]-SB-Cu (II) in the synthesis of tetrazole derivatives. After completing the reaction, the catalyst was separated by an external magnet from the reaction mixture, washed with ethyl acetate, dried, and reused in subsequent catalytic cycles under the same reaction conditions. The recycled catalyst was successfully reused for eight runs (Fig. 15) with a maximum loss of ~ 12% of yield. The FT-IR comparison of fresh and reused catalysts is shown in Fig. 16 with no change in the catalyst structure.

Recycling chart of Fe3O4@SiO2-Im[Br]-SB-Cu (II) MNP catalyst for the synthesis of 1-aryl 1H-tetrazole (blue) and 5-aryl 1H-tetrazole (red) derivatives.

FT-IR spectra of fresh (blue) and reuse (orange) of Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst.

To investigate the heterogeneous nature of our catalyst, the hot filtration test was performed.

A hot filtration test was performed to evaluate the metal leaching rate and assess if the catalytic activity of our catalyst is not due to leached Cu(II) species in the reaction mixture (Fig. 17). In the model reaction for the synthesis of 1-aryl 1H-tetrazole derivatives after the half reaction time in which the reaction conversion rate is 50%, the reaction was stopped, and the catalyst was removed with an external magnet. The reaction mixture without the catalyst was then allowed to proceed further for 60 min. After the separation of catalyst from the reaction mixture, no increase in conversion was observed. This is a strong indication that the catalytic process is taking place only in the presence of the nano-catalyst and confirms the heterogeneity of the catalytic process. The test also indicates that there is no active copper metal species in the synthesis of tetrazole was leached into the reaction mixture.

Hot filtration diagram of Fe3O4@SiO2-Im[Br]-SB-Cu (II) nano-catalyst in the synthesis reaction of tetrazole derivatives.

Our catalyst was benchmarked against published catalyst for the synthesis of tetrazole derivatives (Table 5). The data in Table 5 show that our catalyst (Entry 10) is more efficient than the other reported catalysts in terms of yield and reaction time.

We have reported the preparation of novel heterogeneous recoverable and reusable nano-catalyst, Fe3O4@SiO2-Schiff base-Cu(II) complex, which is able to catalyze green formation of 1- and 5-substituted 1H-tetrazoles using multicomponent reaction (MCR) approach between aromatic amines, ethyl orthoformate and sodium azide for the preparation of 1-aryl 1H-tetrazole derivatives and between aryl-aldehydes, hydroxylamine hydrochloride and sodium azide for the synthesis of 5-aryl 1H-tetrazole under mild conditions and short reaction time in water. The catalyst was well characterized by various techniques including FT-IR, VSM, XRD, EDX, FE-SEM, TEM, TGA, ICP and AAS. This nano-catalyst simplicity, high efficiency, convenient reusability, ease of work-up are among its critical advantages. Various aromatic aldehydes and aromatic amines served as suitable substrates for the preparation of substituted tetrazoles via MCR protocol with high to excellent yields. This nano-catalytic system has undeniably proven as an efficient and ecofriendly catalyst for aryl-substituted tetrazoles synthesis. Future investigation in the synthesis of alkyl-substituted tetrazoles using aliphatic aldehydes and amines will determine the scope of this nano-catalyst application.

The datasets generated and/or analyzed during the current study are not publicly available due to the continuation of the work at Faculty of Science, University of Birjand, Iran, but are available from the corresponding author on reasonable request.

Sarvary, A. & Maleki, A. A review of syntheses of 1, 5-disubstituted tetrazole derivatives. Mol. Divers. 19, 189–212 (2015).

Article CAS PubMed Google Scholar

Sharghi, H., Ebrahimpour Moghaddam, S. & Doroodmand, M. M. Facile synthesis of 5-substituted-1H-tetrazoles and 1-substituted-1H-tetrazoles catalyzed by recyclable 4′-phenyl-2, 2′: 6′, 2 ″-terpyridine copper (II) complex immobilized onto activated multi-walled carbon nanotubes. J. Organomet. Chem. 738, 41–48 (2013).

Article CAS Google Scholar

Popova, E. A., Protas, A. V. & Trifonov, R. E. Tetrazole derivatives as promising anticancer agents. Anti Cancer Agents Med. Chem. 17, 1856–1868 (2017).

CAS Google Scholar

Kozikowski, A. P. et al. Synthesis of urea-based inhibitors as active site probes of glutamate carboxypeptidase II: Efficacy as analgesic agents. J. Med. Chem. 47, 1729–1738 (2004).

Article CAS PubMed Google Scholar

Mohammad, J. H. Biological activities importance of tetrazole derivatives. Eur. Acad. Res. 3, 12803 (2016).

Google Scholar

Sutar, A. K., Maharana, T., Das, Y. & Rath, P. Polymer supported nickel complex: Synthesis, structure and catalytic application. J. Chem. Sci. 126, 1695–1705 (2014).

Article CAS Google Scholar

Mavrogiorgou, A. & Louloudi, M. Mn-Schiff base modified MCM-41, SBA-15 and CMK-3 NMs as single-site heterogeneous catalysts: Alkene epoxidation with H2O2 incorporation. J. Mol. Catal. A 413, 40–55 (2016).

Article CAS Google Scholar

Taghizadeh, M. J., Karimi, H. & Sadeghi-Abandansari, H. Vanadium-Schiff base complex-functionalized SBA-15 as a heterogeneous catalyst: Synthesis, characterization and application in pharmaceutical sulfoxidation of sulfids. Res. Chem. Intermed. 42, 8201–8215 (2016).

Article CAS Google Scholar

Godhani, D. R., Nakum, H. D., Parmer, D. K., Mehta, J. P. & Desai, N. C. Tuning of the reaction parameters to optimize allylic oxidation of cyclohexene catalyzed by zeolite-Y entrapped transition metal complexes. J. Mol. Catal. A 415, 37–55 (2016).

Article CAS Google Scholar

Mashhoori, M. S., Sandaroos, R. & Moghaddam, A. Z. Polymeric imidazolium ionic liquid-tagged manganese Schiff base complex: An efficient catalyst for the Biginelli reaction. Res. Chem. Intermed. 46, 4939–4954 (2020).

Article CAS Google Scholar

Mashhoori, M. S., Sandaroos, R. & Zeraatkar Moghaddam, A. Highly proficient poly ionic liquid functionalized Mn (III) schiff-base catalyst for green synthesis of chromene derivatives. ChemistrySelect 5, 7148–7154 (2020).

Article CAS Google Scholar

Mittal, R. & Awasthi, S. K. Recent advances in the synthesis of 5-substituted 1H-tetrazoles: A complete survey (2013–2018). Synthesis 51, 3765–3783 (2019).

Article CAS Google Scholar

Kolo, K. & Sajadi, S. M. An efficient synthesis of 5-alkylthio and 5-arylthiotetrazoles using Fe3O4 nanoparticles as a magnetically recoverable and reusable catalyst. Lett. Org. Chem. 10, 688–692 (2013).

Article CAS Google Scholar

Sharghi, H., Ebrahimpourmoghaddam, S. & Doroodmand, M. M. Facile synthesis of 5-substituted-1H-tetrazoles and 1-substituted-1H-tetrazoles catalyzed by recyclable 4′-phenyl-2, 2′: 6′, 2 ″-terpyridine copper (II) complex immobilized onto activated multi-walled carbon nanotubes. J. Organomet. Chem. 738, 41–48 (2013).

Article CAS Google Scholar

Dehghani, F., Sardarian, A. R. & Esmaeilpour, M. Salen complex of Cu (II) supported on superparamagnetic Fe3O4@ SiO2 nanoparticles: An efficient and recyclable catalyst for synthesis of 1-and 5-substituted 1H-tetrazoles. J. Organomet. Chem. 743, 87–96 (2013).

Article CAS Google Scholar

Esmaeilpour, M., Javidi, J., Dodeji, F. N. & Abarghoui, M. M. Facile synthesis of 1-and 5-substituted 1H-tetrazoles catalyzed by recyclable ligand complex of copper (II) supported on superparamagnetic Fe3O4@ SiO2 nanoparticles. J. Mol. Catal. A Chem. 393, 18–29 (2014).

Article CAS Google Scholar

Rad, M. N. S., Behrouz, S., Dehchenari, V. S. & Hoseini, S. J. Cu/graphene/clay nanohybrid: A highly efficient heterogeneous nanocatalyst for synthesis of new 5-substituted-1H-tetrazole derivatives tethered to bioactive N-heterocyclic cores. J. Heterocycl. Chem. 1, 355–365 (2017).

Google Scholar

Gao, G., Di, J. Q., Zhang, H. Y., Mo, L. P. & Zhang, Z. H. A magnetic metal organic framework material as a highly efficient and recyclable catalyst for synthesis of cyclohexenone derivatives. J. Catal. 387, 39–46 (2020).

Article CAS Google Scholar

Zhang, M., Liu, Y. H., Shang, Z. R., Hu, H. C. & Zhang, Z. H. Supported molybdenum on graphene oxide/Fe3O4: An efficient, magnetically separable catalyst for one-pot construction of spiro-oxindole dihydropyridines in deep eutectic solvent under microwave irradiation. Catal. Commun. 88, 39–44 (2017).

Article CAS Google Scholar

Chen, M. N., Mo, L. P., Cui, Z. S. & Zhang, Z. H. Magnetic nanocatalysts: Synthesis and application in multicomponent reactions. Curr. Opin. Green Sustain. 15, 27–37 (2019).

Article Google Scholar

Lin, Y. S. & Haynes, C. L. Synthesis and characterization of biocompatible and size-tunable multifunctional porous silica nanoparticles. Chem. Mater. 21, 3979–3986 (2009).

Article CAS Google Scholar

Mondal, J., Sen, T. & Bhaumik, A. Fe3O4@ mesoporous SBA-15: a robust and magnetically recoverable catalyst for one-pot synthesis of 3, 4-dihydropyrimidin-2 (1 H)-ones via the Biginelli reaction. Dalton Trans. 41, 6173–6181 (2012).

Article CAS PubMed Google Scholar

Gawande, M. B., Brancoa, P. S. & Varma, R. S. Nano-magnetite (Fe3O4) as a support for recyclable catalysts in the development of sustainable methodologies. Chem. Soc. Rev 42, 3371–3393 (2013).

Article CAS PubMed Google Scholar

Gawande, M. B., Monga, Y., Zboril, R. & Sharma, R. K. Silica-decorated magnetic nanocomposites for catalytic applications. Coord. Chem. Rev. 288, 118–143 (2015).

Article CAS Google Scholar

Swami, S., Sahu, S. N. & Shrivastava, R. Nanomaterial catalyzed green synthesis of tetrazoles and its derivatives: A review on recent advancements. RSC Adv. 11, 39058–39086 (2021).

Article ADS CAS PubMed PubMed Central Google Scholar

Tamoradi, T., Irandoust, A. & Ghadermazi, M. L. complex supported on magnetic nanoparticles: Green, efficient, novel and reusable nanocatalyst for the synthesis of 5-substituted tetrazoles and the oxidation reactions in neat condition. J. Iran. Chem. Soc. 16, 1723–1733 (2019).

Article CAS Google Scholar

Tamoradi, T., Taherabadi, S. & Ghadermazi, M. Neodymium immobilized on Fe3O4: A new and recoverable catalyst for oxidation reactions and synthesis of 5-substituted 1H-tetrazoles in green condition. Polyhedron 171, 305–311 (2019).

Article CAS Google Scholar

Moeini, N., Tamoradi, T., Ghadermazi, M. & Ghorbani-Choghamarani, A. Anchoring Ni (II) on Fe3O4@ tryptophan: A recyclable, green and extremely efficient magnetic nanocatalyst for one-pot synthesis of 5-substituted 1H-tetrazoles and chemoselective oxidation of sulfides and thiols. Appl. Organomet. Chem. 32, e4445 (2018).

Article CAS Google Scholar

Ashraf, M. A., Liu, Z., Li, C. & Zhang, D. Fe3O4@ L-lysine-Pd (0) organic–inorganic hybrid: As a novel heterogeneous magnetic nanocatalyst for chemo and homoselective [2+ 3] cycloaddition synthesis of 5-substituted 1H-tetrazoles. Appl. Organomet. Chem. 35, e6133 (2021).

CAS Google Scholar

Habibi, D., Pakravan, N., Arabi, A. & Kaboudvand, Z. Preparation of Fe3O4@ 5, 10-dihydropyrido [2, 3-b] quinoxaline-7, 8-diol copper complex: A capable nanocatalyst for the green synthesis of 1-substituted 1H-tetrazoles. Appl. Organomet. Chem. 32, e3988 (2018).

Article CAS Google Scholar

Habibi, D. et al. Application of the Fe3O4@ 1, 10-phenanthroline-5, 6-diol@ Mn nano-catalyst for the green synthesis of tetrazoles and its biological performance. Appl. Organomet. Chem. 32, e4005 (2018).

Article CAS Google Scholar

Salimi, M. & Zamanpour, A. Green synthesis of the 1-substituted 1H–1, 2, 3, 4-tetrazoles over bifunctional catalyst based on copper intercalated into Mg/Al hydrotalcite modified magnetite nanoparticles. Appl. Organomet. Chem. 34, e5682 (2020).

CAS Google Scholar

Salimi, M., Esmaeli-nasrabadi, F. & Sandaroos, R. Fe3O4@ Hydrotalcite-NH2-CoII NPs: A novel and extremely effective heterogeneous magnetic nanocatalyst for synthesis of the 1-substituted 1H–1, 2, 3, 4-tetrazoles. Inorg. Chem. Commun. 122, 108287 (2020).

Article CAS Google Scholar

Pourjavadi, A., Safaie, N., Hosseini, S. H. & Bennett, C. Highly dispersible and magnetically recyclable poly (1-vinyl imidazole) brush coated magnetic nanoparticles: An effective support for the immobilization of palladium nanoparticles. New J. Chem. 40, 1729–1736 (2016).

Article CAS Google Scholar

Shahbazi, F. & Amani, K. Synthesis, characterization and heterogeneous catalytic activity of diamine-modified silica-coated magnetite-polyoxometalate nanoparticles as a novel magnetically-recoverable nanocatalyst. Catal. Commun. 55, 57–64 (2014).

Article CAS Google Scholar

Prabhu, Y. T., Rao, K. V., Kumari, B. S., Kumar, V. S. S. & Pavani, T. Synthesis of Fe3O4 nanoparticles and its antibacterial application. Int. Nano Lett. 5, 85–92 (2015).

Article CAS Google Scholar

Esmaeilpour, M., Javidi, J. & Zandi, M. Preparation and characterization of Fe3O4@ SiO2@ PMA: AS an efficient and recyclable nanocatalyst for the synthesis of 1-amidoalkyl-2-naphthols. Mater. Res. Bull. 55, 78–87 (2014).

Article CAS Google Scholar

Villa, S., Riani, P., Locardi, F. & Canepa, F. Functionalization of Fe3O4 NPs by silanization: Use of amine (APTES) and thiol (MPTMS) silanes and their physical characterization. Materials 9, 826 (2016).

Article ADS PubMed Central CAS Google Scholar

Kazemnejadi, M., Shakeri, A., Mohammadi, M. & Tabefam, M. Direct preparation of oximes and Schiff bases by oxidation of primary benzylic or allylic alcohols in the presence of primary amines using Mn (III) complex of polysalicylaldehyde as an efficient and selective heterogeneous catalyst by molecular oxygen. J. Iran. Chem. Soc. 14, 1917–1933 (2017).

Article CAS Google Scholar

Wu, Z. et al. Brønsted acidic ionic liquid modified magnetic nanoparticle: An efficient and green catalyst for biodiesel production. Ind. Eng. Chem. Res. 53, 3040–3046 (2014).

Article CAS Google Scholar

Kazemnejadi, M., Nikookar, M., Mohammadi, M., Shakeri, A. & Esmaeilpour, M. Melamine-Schiff base/manganese complex with denritic structure: An efficient catalyst for oxidation of alcohols and one-pot synthesis of nitriles. J. Colloid Interface Sci. 527, 298–314 (2018).

Article ADS CAS PubMed Google Scholar

Esmaeilpour, M., Javidi, J., Abarghoui, M. M. & Dodeji, F. N. Synthesis and characterization of Fe3O4@ SiO2-polymer-imid-Pd magnetic porous nanospheres and their application as a novel recyclable catalyst for Sonogashira-Hagihara coupling reactions. J. Iran. Chem. Soc. 11, 499–510 (2014).

Article CAS Google Scholar

Habibi, D., Nasrollahzadeh, M. & Kamali, T. A. Green synthesis of the 1-substituted 1 H-1,2,3,4-tetrazoles by application of the Natrolite zeolite as a new and reusable heterogeneous catalyst. Green Chem. 13, 3499–3504 (2011).

Article CAS Google Scholar

Habibi, D. et al. Application of the Fe3O4@ 1, 10-phenanthroline-5, 6-diol@ Mn nano-catalyst for the green synthesis of tetrazoles and its biological performance. Appl. Organomet. Chem. 32, 4005 (2018).

Article CAS Google Scholar

Demko, Z. P. & Sharpless, K. B. Preparation of 5-substituted 1 H-tetrazoles from nitriles in water. J. Org. Chem. 66, 7945–7950 (2001).

Article CAS PubMed Google Scholar

Sreedhar, B., Kumar, A. S. & Yada, D. CuFe2O4 nanoparticles: A magnetically recoverable and reusable catalyst for the synthesis of 5-substituted 1H-tetrazoles. Tetrahedron Lett. 52, 3565–3569 (2011).

Article CAS Google Scholar

Aureggi, V. & Sedelmeier, G. 1, 3-Dipolar cycloaddition: Click chemistry for the synthesis of 5-substituted tetrazoles from organoaluminum azides and nitriles. Angew. Chem. Int. Ed. 46, 8440–8444 (2007).

Article CAS Google Scholar

Esmaeilpour, M., Javidi, J., Nowroozi Dodeji, F. & Mokhtari Abarghoui, M. Facile synthesis of 1-and 5-substituted 1H-tetrazoles catalyzed by recyclable ligand complex of copper (II) supported on superparamagnetic Fe3O4@ SiO2 nanoparticles. J. Mol. Catal. A Chem. 393, 18–29 (2014).

Article CAS Google Scholar

Jin, T., Kitahara, F., Kamijo, S. & Yamamoto, Y. Copper-catalyzed synthesis of 5-substituted 1H-tetrazoles via the [3+2] cycloaddition of nitriles and trimethylsilyl azide. Tetrahedron Lett. 49, 2824–2827 (2008).

Article CAS Google Scholar

Sardarian, A. R., Eslahi, H. & Esmaeilpour, M. Copper (II) complex supported on Fe3O4@ SiO2 Coated by polyvinyl alcohol as reusable nanocatalyst in N-arylation of amines and N (H)-heterocycles and green synthesis of 1H-tetrazoles. ChemistrySelect 3, 1499–1511 (2018).

Article CAS Google Scholar

Xiong, X., Yi, C., Liao, X. & Lai, S. A practical multigram-scale method for the green synthesis of 5-substituted-1H-tetrazoles in deep eutectic solvent. Tetrahedron Lett. 60, 402–406 (2019).

Article CAS Google Scholar

Tamoradi, T., Kal-Koshvandi, A., Karmakar, B. & Maleki, A. Immobilization of La on THH-CO2H@ Fe3O4 nanocomposite for the synthesis of one-pot multicomponent reactions. Mater. Res. Express 8, 056101 (2021).

Article ADS CAS Google Scholar

Jabbari, A., Tahmasbi, B., Nikoorazm, M. & Ghorbani-Choghamarani, A. A new Pd-Schiff-base complex on boehmite nanoparticles: Its application in Suzuki reaction and synthesis of tetrazoles. Appl. Organomet. Chem. 32, 4295 (2018).

Article CAS Google Scholar

Eslahi, H., Reza Sardarian, A. & Esmaeilpour, M. Green approach for preparation of new hybrids of 5-substituted-1H-tetrazoles using novel recyclable nanocatalyst based on copper (II) anchored onto glucosamine grafted to Fe3O4@ SiO2. ChemistrySelect 6, 1984–1993 (2021).

Article CAS Google Scholar

Sajjadi, M. et al. Modified chitosan-zeolite supported Pd nanoparticles: A reusable catalyst for the synthesis of 5-substituted-1H-tetrazoles from aryl halides. Int. J. Biol. Macromol. 209, 1573–1585 (2022).

Article CAS PubMed Google Scholar

Koolivand, M., Nikoorazm, M., Ghorbani-Choghamarani, A. & Mohammadi, M. A novel cubic Zn-citric acid-based MOF as a highly efficient and reusable catalyst for the synthesis of pyranopyrazoles and 5-substituted 1H-tetrazoles. Appl. Organomet. Chem. 36, e6656 (2022).

Article CAS Google Scholar

Khorramabadi, V., Habibi, D. & Heydari, S. Facile synthesis of tetrazoles catalyzed by the new copper nano-catalyst. Green Chem. Lett. Rev. 13, 50–59 (2020).

Article CAS Google Scholar

Samadi Garjaei, S., Koukabi, N., & Nouri Parouch, A. Nano-Fe3O4/In: A heterogeneous magnetic nanocatalyst for synthesis of tetrazole derivatives under solvent-free conditions. Inorg. Nano Met. Chem. 1–9 (2022).

Download references

The authors gratefully acknowledge the partial support of this study by the University of Birjand, Birjand, Iran.

Department of Chemistry, Faculty of Science, University of Birjand, P.O. Box 97175-615, Birjand, Iran

Mahboobeh-Sadat Mashhoori & Reza Sandaroos

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

The work was done by M.-S.M. and the publication was drafted by R.S. The main text and the final version of the article was done by M.-S.M.

Correspondence to Mahboobeh-Sadat Mashhoori.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Mashhoori, MS., Sandaroos, R. New ecofriendly heterogeneous nano-catalyst for the synthesis of 1-substituted and 5-substituted 1H-tetrazole derivatives. Sci Rep 12, 15364 (2022). https://doi.org/10.1038/s41598-022-19478-w

Download citation

Received: 14 February 2022

Accepted: 30 August 2022

Published: 13 September 2022

DOI: https://doi.org/10.1038/s41598-022-19478-w

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

Research on Chemical Intermediates (2023)

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.